Designer mode menu reference, 1 designer mode basics, Chapter 19, designer mode menu reference – Lab.gruppen PLM 20K44 User Manual
Page 220: Designer mode menu reference 215

Lake Controller Operation Manual Rev 1.5.4
Designer Mode Menu Reference
215
19. Designer Mode Menu Reference
The Lake Controller software provides two modes of operation: User Mode and Designer Mode. This
chapter describes Designer Mode.
19.1 Designer Mode Basics
Various important functions that Designer Mode activates include:
▸
Global Access security
▸
Individual overlay/screen access security
▸
Level Limits
▸
Factory levels (Adjust Factory mode)
▸
Password protection of Modules and base configurations
▸
All-pass filters
▸
Designer Worksheets
▸
Polarity locking
This chapter provides detailed descriptions of these functions. An example system design illustrates the
utility of Designer Mode functions. A quick reference guide provides a high-level overview of Designer
Mode functions.
This document refers to loudspeaker Modules in the examples, although all features (with the exception of
crossovers) also apply to Mesa EQ Modules.
19.1.1 Security Levels
Designer Mode provides three levels of password-protected security.
19.1.1.1 Global
At the global level, a simple selection makes system-wide changes that affect what can be seen or adjusted
in User Mode. A system designer can choose to hide any combination of LEVELS, PEQ, GEQ, XOVER,
AUX, HPF/LPF. These items can also be set to View Only, allowing a User Mode operator to view but not
change information as required.