Lab.gruppen PLM 20K44 - Manual (Page 154)

Lake Controller Operation Manual Rev 1.5.4
Modules Menu Reference
149
8.3.2 Frame Label
The Frame label is a ten-character user-defined value that appears on the Module icon and on the front
panel of the device. The Frame label associates the Module icons with a Lake device.
To label a Frame:
1. Tap any Module of the Frame you wish to label.
2. Tap FRAME LABEL, enter a Frame name, and tap OK.
When a Frame consists of multiple Modules,
labelling the Frame via one Module automatically
updates the Frame label on any associated Module
icons.
8.3.3 Module and Base Configuration Locking
The following functions are active only in Designer Mode:
▸ MODULE UNLOCKED/UNLOCK MODULE
▸ SET MOD PASSWORD
▸ BASE UNLOCKED/UNLOCK BASE
▸ SET BASE PASSWORD
For additional details on these functions, please refer to chapter 19.
8.4 Copy/Paste/Replace
From the MODULES menu, tap the COPY/PASTE/REPLACE button to view a submenu that allows the
transferring of data between Modules. These functions enable fast setup of multiple speakers using the
same type and configuration.
The REPLACE function allows assignment of a different physical hardware device to perform the task of a
selected device (i.e. to transfer all data from one hardware device to another). The BATCH REPLACE func-
tion allows fast transfer of data from a virtual or offline configuration to online Frames.
8.4.1 Copy
This function is active only when a Module icon is selected. To copy data from a Module: