Flagging data for poor quality, Clearing data flags – ADS Environmental Services Profile Software 950015B6 User Manual

Page 427

Tabular Editor

11-9

CONFIDENTIAL – Covered by ADS Software License Agreement

Equal
button

2. Enter a value in the Factor field.

3. Select the Equal toolbar button.

The selected data now reflects the new value.

Note: Manually modified tabular data displays in
magenta.

Flagging Data for Poor Quality

Use the Flag toolbar button to apply flags to selected tabular data.
Flags can be applied to any selected tabular data. When you have
reason to believe that the data point's quality is questionable, you
can flag that point to exclude it from calculations and reports.

Remember: Applying flags to data affects all dependent
data.

Flag
button

1. Select the data to which you want to apply flags.

2. Select the (red) Flag button.

The selected data is now flagged and displays in red.

Clearing Data Flags

Use the Clear Flags toolbar button to remove flags from previously
flagged data.

Remember: Removing flags from data affects all
dependent data.