ADS Environmental Services Profile Software 950015B6 User Manual

Page 118

2-78

Profile Software User's Guide

CONFIDENTIAL – Covered by ADS Software License Agreement



DAC Gain Choose the method for managing the
amplification of the analog signal that returns to the sensor.
Select the Auto (default) option to allow the monitor to
automatically optimize the amplification of the signal.
Choose Manual to enter a fixed value between -12dB
(lower amplification) and +12dB (higher amplification).



Ping Amplitude Choose the method for managing the
amplification of the analog signal that is sent out, or
transmitted from, the sensor. Smaller pipes typically
require lower (quieter) amplitude values, while larger pipes
typically need stronger (louder) amplitudes. Select the
Auto (default) option to allow the monitor to automatically
optimize the amplification of the signal. Select the Manual
option to enter a percentage of full amplification at which
to transmit the signal. Enter a percentage between 10 and
100 (where 100 represents maximum amplification).