Storing manually entered coefficients – ADS Environmental Services Profile Software 950015B6 User Manual

Page 249

Quantity Coefficient Generator

4-27

CONFIDENTIAL – Covered by ADS Software License Agreement

Store Data dialog

2. Enter the date and time of the first data point to which you want

to begin applying the coefficient values in the Start Time field.

3. Select the Avg or Bestfit radio button from the Hydraulic

Coefficient section to indicate which hydraulic coefficient you
want to save.

4. Select the Avg or Bestfit radio button from the

Roughness/Slope section to indicate which Roughness and
Slope values you want to save.

5. Select the OK button to save the coefficients to the database.

Profile automatically regenerates all dependent data.

Storing Manually Entered Coefficients

Select a specific Edit command to manually enter HC,
Roughness/Slope, Silt, or Offset and Gain values to the database.
A dialog will display to allow you to enter and store the
coefficient(s). You also can use the Edit command to replace,
delete, or print coefficient entries.