ADS Environmental Services Profile Software 950015B6 - Manual (Page 414)

Hydrograph Editor 10-23
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Pasting Data to the Hydrograph
Perform these steps after using the Edit > Copy option to paste
copied data.
1. Select the Edit > Paste option to display the Paste Data dialog
box. The Paste From section displays the monitoring point
and data entity from which the data was copied.
Paste Data dialog
2. Use the Paste To field to locate and select the data entity to
which you want to paste the copied data.
3. Enter the Start Time to which you want to paste the clipboard
data. The time span for the copied data will remain fixed.
4. Select OK to paste the data.
Deleting a Section of Hydrograph Data
Delete a selection of hydrograph data and paste it to the Windows
clipboard using the Cut option. You can use clipboard data to paste
to another area of the hydrograph using the Edit > Paste option.
Note: Use the Delete toolbar button to remove data from
the hydrograph without copying the data to the clipboard.
1. Select the hydrograph data you want to edit. Refer to Selecting
Hydrograph Data on page 10-15 for more information on
selecting data.