Program wireless – ADS Environmental Services Profile Software 950015B6 User Manual

Page 308

Diagnostics

6-37

CONFIDENTIAL – Covered by ADS Software License Agreement

 Span Off Choose this option to specify the span of time you

want the wireless modem to be unavailable (powered down)
during the selected day. If you choose this mode, specify
values in the Start and End fields for the beginning and
ending time for the wireless modem to be powered down.

 Start This field is enabled when you choose Span On or

Span Off mode selections and allows you to specify the
beginning time for the selected span.

 End This field is enabled for Span On or Span Off mode

selections and allows you to specify the ending time for the
selected span.

Program Wireless

Use the Program Wireless function when you need to update the
configuration of the wireless modem to ensure reliable
communications. Use this function, for example after performing a
modem board upgrade or modem board swap to program the wireless
modem to ensure successful wireless communications.

Program the wireless modem in the following way:

1. Select the Connect button to establish communication with the

monitor.

Profile initiates communication with the monitor and establishes a
connection. Choose the Abort button prior to establishing a
connection to abort the communication attempt.

2. Select Program Wireless from the Functions drop-down list, and

then select the Perform button to display the Program TCP/IP
window.

3. Select Yes to begin the wireless programming function and

disconnect from the monitor.