ADS Environmental Services Profile Software 950015B6 - Manual (Page 231)

Quantity Coefficient Generator 4-9
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Entering Field Confirmations
After setting up the view, begin entering the field confirmations into
the Quantity Coefficient Generator table. Manually enter field
confirmations to the confirmation table or populate the confirmation
table with data available in the Profile database. Refer to the
Confirmation Table Reference to verify the proper field entries.
Confirmation Table Reference
Use the confirmation table to enter and record manually performed
field confirmations. The following information defines each
column of the confirmation table (from left to right):
• Use A number in this column indicates that the confirmation
in the corresponding row will be included in the hydraulic
coefficient calculations. Change the number to an I to ignore
the confirmation in the hydraulic coefficient calculations.
Note: The same number entered in the Use column for
two or more confirmations on the table will average the
results of the calculations.
• Date Enter the date of the field confirmation.
• Time Enter the time of the field confirmation.
• Method Select Q or V to indicate the type of confirmation
you are entering: select Q for a quantity confirmation (such as
a weir or bucket confirmation); select V for a velocity/depth
confirmation.
• Depth Enter the field confirmation manual depth
measurement (for velocity confirmations).