ADS Environmental Services Profile Software 950015B6 - Manual (Page 309)

6-38 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Note: You must wait at least 5 minutes before attempting to
reestablish communication with the monitor after performing
the Program Wireless function.
Set Time
The time setting feature in Diagnostics enables you to update the
monitor time without reactivating the monitor. This feature is useful
under circumstances such as adjusting the monitor clock to compensate
for daylight savings time. Set the monitor time in the following way:
1. Select the Connect button to establish communication with the
monitor.
Profile initiates communication with the monitor and establishes a
connection. Choose the Abort button prior to establishing a
connection to abort the communication attempt.
2. Select Set Time from the Functions drop-down list, and then
select the Perform button.
Profile sets the time on the monitor based on the clock in your local
computer and generates a log of the communication activity.
TCP/IP Modem Status
Profile enables you to obtain the current battery voltage, firmware
version, and signal strength for the TCP/IP modem in a monitor
equipped for wireless communication. Check the status of the TCP/IP
modem in the following way:
1. Select the Connect button to establish communication with the
monitor.
Profile initiates communication with the monitor and establishes a
connection. Choose the Abort button prior to establishing a
connection to abort the communication attempt.
2. Select TCP/IP Modem Status from the Functions drop-down
list, and then select the Perform button.