ADS Environmental Services Profile Software 950015B6 User Manual

Page 215

3-34

Profile Software User's Guide

CONFIDENTIAL – Covered by ADS Software License Agreement

Average-to-Peak Table dialog

3. Enter new depth and ratio values to the table using either of the

following methods:



Enter individual depths and corresponding ratios in the
Depth and Ratio columns to allow Profile to interpolate
the depth/ratios. The greater the number of known points,
the more accurate and complete the Average-to-Peak
table will be.



Set the entire Ratio column to a specific ratio by entering
the value in the Ratio Value field and then selecting the
Set All Ratios button.

Note: The first depth value in the table must always equal
zero and the last value in the table must always equal the
pipe height.

4. Enter a unique name for the table into the Table Name field.

5. Select OK to save the new table.

Note: You can save multiple tables for the same location
using different names.

The Enter Starting and End Dates dialog will display.