NavCom Sapphire Rev.J - Manual (Page 98)

Sapphire Technical Reference Manual Rev. J
98
1.46 ERASEALM (ASCII)
SF-3050 Sapphire SF-3040
This command is used to clear almanac data stored in non-volatile memory.

The Sapphire engine hardware provides non-volatile memory, which is capable of
retaining stored values in memory when all power is removed from the unit.
Information stored in non-volatile memory includes almanac data.
Command: [ERASEALM] {type}
Parameter Definition
type
Satellite type (keyword) (ALL, GPS, SBAS, STARFIRE, GLONASS, GALILEO,). If empty, it
defaults to “ALL”.
Default: ALL

This command is not used during normal operation of the receiver. It will cause all
almanac data to be discarded from non-volatile memory. It will take the receiver
12.5 minutes to collect full almanac information data again.