Rtknavreset (ascii) – NavCom Sapphire Rev.J User Manual

Page 211

Text mode
Original mode

Sapphire Technical Reference Manual Rev. J

211

1.155

RTKNAVRESET (ASCII)

SF-3050

Sapphire

SF-3040

This command is used to reset the RTK processing. If an integer ambiguity search is in
progress, it will be re-initialized and restarted. If the RTK navigation is in progress, it will be
interrupted and a new, initial ambiguity search will be initiated.

Command: [RTKNAVRESET]



This command must not be used in normal operation. It is typically used in
engineering tests to do repeated searches to validate integer ambiguity search
performance under different conditions.

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E