NavCom Sapphire Rev.J - Manual (Page 134)

Sapphire Technical Reference Manual Rev. J
134
1.88 INPUTSWOPTION (ASCII)
SF-3050 Sapphire SF-3040
This command is used to input Software options. The format for the software options string is the
same as the software_options.opt file. This command prompts a response with the same name,
with a list of all SW options and the status of the SW options. The option code file is an ASCII
text message that can be opened with any common text editor to view the settings and the code.
Command: [INPUTSWOPTION]optionstring
Serial Number : 10280-3
Date : 07/24/09 15:15:22
Options : 10 Hz Nav Rate
25 Hz Data Rate
RTK Base
RTK Extend
Move Base RTK
Network RTK
GPS Signals L1
GPS Signals L2
GPS Signals L2C
GPS Signals L5
GLONASS Signals G1
GLONASS Signals G2
Galileo Signals E1
Galileo Signals E5a
SBAS Corrections
StarFire Corrections
0xBB/0xBA Output Disabled
SFNetwork Team Disabled
Customer :
PO Number :
Options Code : 7BE97A5F 68F87279 2D61DDE3 3D8D8D1A
Figure 4: Example of Software Options File Contents

The contents of the Software Options file are subject to change.
Example: [INPUTSWOPTION] 7BE97A5F 68F87279 2D61DDE3 3D8D8D1A

Sometimes the option generation tool inserts an extra character space. This can be
corrected in Microsoft Notepad, or via the Input Terminal using the method
described below:
This is what the error looks like (extra space between the colon and the first character,
the letter “A):
Options Code : A4DEB10C 22A16D18 644AA8AD 451CF5D3
This is the correct format (no space between the colon and the first character, “A”)
Options Code :A4DEB10C 22A16D18 644AA8AD 451CF5D3
1.89 Reserved