Figure 16: view/edit profile button – NavCom Sapphire Rev.J User Manual
Page 423
Sapphire Technical Reference Manual Rev. J
423
[OUTPUT]PANICA,ONCHANGE,,ETH2
[PORT]1,57600,8,1,NONE
[PORT]3,57600,8,1,NONE
[PORT]2,57600,8,1,NONE
[PORT]4,57600,8,1,NONE
[2DNAVMODE]NEVER,0.0000
[CASINTERVAL]150
[IFSINTERVAL]20000
[PDOPLIMIT]10.0
[RTKTIMEOUT]15.0
[RTKFLOATTIMEOUT]300
[PRDGPSMODE]RTCM1,ON
[PRDGPSMODE]WAASEGNOS,ON
[PRDGPSMODE]SFRTG,ON
[PRDGPSTIMEOUT]RTCM1,300
[PRDGPSTIMEOUT]WAASEGNOS,300
[PRDGPSTIMEOUT]SFRTG,1200
[REFSTNPOS]0,0,0.000000,0,0,0.000000,0.000000
[MULTIPATH]W1
[MULTISATTRACK]OFF,20
[L1FALLBACK]OFF
[VELSMOOTH]ON
[RTKDYNAMIC]MEDIUM
[RTKMULTIPATH]OPENSKY
[RTKSYNCMODE]LOWLATENCY
[RTKFIXMODE]FIXED
[GEOIDALMODEL]DEFAULT
[SETUTCOFFSET]0,0
[RTKMODE]ROVER,CMR,0,
[GGAMODE]LP
[ETHCONFIG]192.168.0.2,255.255.255.0,192.168.0.10
[SERIALMODE]RS232
[USBMODE]DEVICE
2. After saving the changes to the above profile, load them to the receiver, and click View/Edit
Profile on the taskbar.
Figure 16: View/Edit Profile Button
3. Click
on the lower right-hand corner. The receiver will return either the
current loaded profile or ‘None’.