NavCom Sapphire Rev.J - Manual (Page 234)

Sapphire Technical Reference Manual Rev. J
234
L5 and G2 tracking are mutually exclusive due to hardware resource sharing. Turning on
G2 tracking automatically turns off L5 tracking, and vice versa. The command
“[TRACKINGMODE] ALL, ON” turns on all signal tracking except L5. The command
“[TRACKINGMODE] ALL,OFF” turns off all signal tracking, including L5 and G2.
Do not try to turn on L5 and G2 tracking at the same time. If one command
tries to turn on L5 and G2 at the same time, the later pair in the command will
overwrite the earlier pair.
Issuing the command [TRACKINGMODE]WAASEGNOS disables the
satellite.
Examples: [TRACKINGMODE] L2C, OFF
Disables tracking of L2C for all satellites broadcasting it
[TRACKINGMODE] ALL, ON
Enables tracking for all signals and frequencies except L5
[TRACKINGMODE] G1, ON, L2, OFF, L2C, OFF
Enables tracking of G1, but disables L2 and L2C
1.199 Reserved
1.200 Reserved