NavCom Sapphire Rev.J - Manual (Page 95)

Sapphire Technical Reference Manual Rev. J
95
1.40 ENABLEALL (ASCII)
SF-3050 Sapphire SF-3040
This command is used to enable all satellites or all ASIC channels. If any PRNs are currently
disabled, they will be enabled and will be searched for, when visible. If any channels are
currently disabled, they will be enabled and can be used for acquisition and/or tracking of
satellites.
Command: [ENABLEALL] type
Parameter Definition
type Keyword (SAT, CH); SAT for enabling all satellites, CH for enabling all channels
Example: [ENABLEALL] SAT
Enables all satellites
1.41 Reserved