Figure 14: firmware window, Example of installed firmware – NavCom Sapphire Rev.J User Manual

Page 417

Text mode
Original mode

Sapphire Technical Reference Manual Rev. J

417

9. If any file failed to load, go back to the Receiver Options screen and refresh the window.

Identify which software modules did not load. Then follow steps 2 through 8 again, ensuring
the successfully loaded software modules are deselected in step 6 the

10. Click

Check

(refresh) on the Firmware Info window to view the current versions of all

uploaded firmware (see Figure 14).

Figure 14: Firmware Window

– Example of Installed Firmware



For information on loading firmware without using StarUtil 3000, see Appendix G.

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E