NavCom Sapphire Rev.J - Manual (Page 212)

Sapphire Technical Reference Manual Rev. J
212
1.156 RTKSYNCMODE (ASCII)
SF-3050 Sapphire SF-3040
This command is used to configure the RTK measurement synchronization mode.
Command: [RTKSYNCMODE] keyword (LOWLATENCY, TIMESYNC) (see Table 87)
Default: LOWLATENCY
Table 87: RTK Measurement Synchronization Mode Keywords
Keyword Mnemonic Description
LOWLATENCY
This configures the RTK rover receiver to use the latest RTK
corrections from the base receiver in RTK mode.
TIMESYNC
This configures the RTK rover receiver to synchronize its
measurements with RTK corrections and then process in RTK
mode.