NavCom Sapphire Rev.J - Manual (Page 107)

Sapphire Technical Reference Manual Rev. J
107
1.52 EVENTLATCH (ASCII)
SF-3050 Sapphire SF-3040
This command is used to enable the operation of the event latch feature in the available port
and sets the event latch time tag to be triggered by the rising or falling edge of the external
pulse.
Command: [EVENTLATCH] port, on_off, trigger
Parameter Definition
port Keyword that selects port A
on_off Keyword that enables (ON) or disables (OFF) the event latch port
trigger Keyword that sets the trigger edge of the pulse (RISING, FALLING)
Default: Latch A = OFF, RISING