NavCom Sapphire Rev.J User Manual

Page 118

Text mode
Original mode

Sapphire Technical Reference Manual Rev. J

118



USBMODE] command in this manual.

Examples: [FSDIR)]

[FSDIR] Drive is A:

[FSDIR] Volume has no label

[FSDIR] Volume has no serial number

[FSDIR] Directory is: A:\

[FSDIR] 04/28/2010 23:42:31

datalog

[FSDIR] 0 File(s)

[FSDIR] 1 Dir(s)



Once USB mode is changed to Mass Storage Device mode, the onboard file
system commands cannot access the SD flash. The following message is output:

[FSDIR]"ACCESS DENIED: USB IS IN MASS STORAGE MODE".



When changing the USB from Mass Storage Device mode to other modes, please
allow approximately 1 minute for the SD flash to be reconfigured and the onboard
file system to be reinitialized before implementing the onboard file system
commands.

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E