Simulatorstart (ascii), Reserved – NavCom Sapphire Rev.J User Manual

Page 227

Text mode
Original mode

Sapphire Technical Reference Manual Rev. J

227

1.183

SIMULATORSTART (ASCII)

SF-3050

Sapphire

SF-3040

This command is used for the receiver to do repeated simulator tests. After receiving this
command, the receiver will erase position, ephemeris, time, invalidate real-time clock and
restart.

Example:

[SIMULATORSTART]

Causes the receiver to dump the current position, ephemeris, and time; invalidate
real-time clock; and restart

1.184

Reserved

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E