NavCom Sapphire Rev.J User Manual

Page 185

Text mode
Original mode

Sapphire Technical Reference Manual Rev. J

185

When a pass through session is enabled between two ports, subsequent
commands input on either port will be ignored; i.e., they will be treated as data to
be passed through. The sole exception to this is the [PASSTHRU]OFF
command, which allows a user to turn off the pass through session.

Examples: [PASSTHRU] ON, 2

(Assuming the command was input on serial port 1)

All data coming in on port 1 will be passed to port 2.

All data coming in on port 2 will be passed to port 1.

None of the data will be parsed by the receiver.

All scheduled messages for ports 1 and 2 will be stopped.

[PASSTHRU] OFF

Turns off pass through mode

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E