C/no, Reserved, Table 119: loop bandwidth – NavCom Sapphire Rev.J User Manual

Page 271

Text mode
Original mode

Sapphire Technical Reference Manual Rev. J

271

Code

Description

GUI Display

w code tracking pull in

WCDE

Locked up for C/A satellites, measurements ready

LOCK

Coherent Y Tracking, measurements ready

COHY

Dedicated noise tracking only state

NOIS

Loop bandwidth is in the 3 LSB (2:0) and represents one of the data items in
Table 119.



Keep in mind that these values start at 2 instead of 0.

Table 119: Loop Bandwidth

Code

Description

Bandwidth 20 Hz

Bandwidth 10 Hz

Bandwidth 5 Hz

Bandwidth 2.5 Hz

2.15.8.4 C/No

This field displays the signal-to-noise ratio for the channel listed above, in db/Hz. This
field will only have a value if the tracking status field is greater than 18. The LSB
represents 0.25 db/Hz.

2.16 Reserved

2.17 Reserved

2.18 Reserved

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E