NavCom Sapphire Rev.J - Manual (Page 97)

Sapphire Technical Reference Manual Rev. J
97
1.44 ENABLERTCM2.3
SF-3050 Sapphire SF-3040
The command is used to set rover to accept RTCM 2.3 / 2.2 code corrections.
Command: [ENABLERTCM2.3] ON, OFF
Parameter Definition
ON Keyword that enables RTCM 2.3
OFF Keyword that enables RTCM 2.2
[ENABLERTCM2.3] keyword(ON,OFF)
Default: ON
Examples: [ENABLERTCM2.3] on
This configures Rover to accept RTCM2.3 corrections.
[ENABLERTCM2.3] off
This configures Rover to accept RTCM2.2 corrections.
1.45 Reserved