Enablegeofence (ascii), Reserved – NavCom Sapphire Rev.J User Manual

Page 96

Text mode
Original mode

Sapphire Technical Reference Manual Rev. J

1.42 ENABLEGEOFENCE (ASCII)

SF-3050

Sapphire

SF-3040

This command is used to enable or disable the use of the geofence during WAAS processing.
The geofence defines the geographical boundaries which define where the SBAS corrections
will be applied to the position solution.

Command:

[ENABLEGEOFENCE] ON, OFF

Parameter

Definition

Keyword that enables geofence

OFF

Keyword that disables geofence

Default: ON

Examples: [ENABLEGEOFENCE] ON

Enables geofencing

1.43 Reserved

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E