Reserved – NavCom Sapphire Rev.J User Manual
Page 168
Sapphire Technical Reference Manual Rev. J
168
L5 and G2 tracking are mutually exclusive due to hardware resource sharing. The
NAVMEASUSE command allows both L5 and GLONASS to be enabled for
navigation; however, due to the tracking limitations, only one of the two signals will
be available.
Tracking of newer navigation satellite signals (L2C, L5, E1, and E5A) is subject to
the availability of the signals from newer satellites, the "health bit" set to "healthy",
and the SF-3050 navigation software updated to a version compatible with the
signals.
Never use WAAS set to ON outside of the American WAAS iono grid
footprint. Doing so outside of this footprint may result in poor Base Station
usage of satellites and/or limit the number of satellites the rover might
otherwise use in an RTK solution.
Examples: [NAVMEASUSE] L2C, OFF
Disables nav usage of L2C for all satellites broadcasting it
[NAVMEASUSE] ALL, ON
Enables nav measurement usage for all signals and frequencies
[NAVMEASUSE] L1, ON, L2, OFF, L2C, OFF
Enables nav measurement usage of L1, but disables L2 and L2C
1.118
Reserved