NavCom Sapphire Rev.J - Manual (Page 443)

Sapphire Technical Reference Manual Rev. J
443
Table 235: SubID NB_Working Format
Field
Data
Type
Value and Description
Function Type SubID U08 Enum NB_Working
Pass or Fail U08 1
Valid count U16 0
Address U32 0
SubID NB_ResetCmd Message Format
SubID NB_ResetCmd is sent from the PC to the receiver. It is used to tell the GNSS board
software to do a software reset after bootloading. After reset, the GNSS board runs navigation
software, if software exists; otherwise, it will stay in bootloader1. Its format is defined in Table
236.
Table 236: SubID NB_ResetCmd Format
Field
Data
Type
Value and Description
Function Type
SubID U08 Enum NB_ResetCmd
Pass or Fail U08 0
Valid count U16 0
Address U32 0
SubID NB_ResetRep Message Format
SubID NB_ResetRep is sent from the receiver to the PC. It is the reply message to
NB_ResetCmd. Its format is defined in Table 237.
Table 237: SubID NB_ResetRep Format
Field
Data
Type
Value and Description
Function Type
SubID U08 Enum NB_ResetRep.
Pass or Fail U08 1= pass, 0 = fail.
Valid count U16 0
Address U32 0