NavCom Sapphire Rev.J - Manual (Page 351)

Sapphire Technical Reference Manual Rev. J
351
2.91.15 Additional Navigation Solution Status
This field displays additional status codes for the navigation solution; refer to the
Navigation Solution Status (the first byte of this message, above), for more information.
Bit Mask Description
0x01 Doppler applied (if set, the velocity was calculated based on Doppler
measurements)
0x02 MBRTK applied (if set, Navigation Mode of 3-7 indicates Moving Base
RTK)
0x03 SBAS geofence source (0 – NavCom-defined geofence table; 1-
Broadcast* geofence table)
*WAAS and MSAS systems do not broadcast geofence tables. Thus bit
3 of SBAS geofence source is used for EGNOS only
0x04-0x80 Reserved
2.92 Reserved
2.93 Reserved