Ntrip client status messages – NavCom Sapphire Rev.J User Manual

Page 170

Text mode
Original mode

Sapphire Technical Reference Manual Rev. J

170

1.119.1

NTRIP Client Status Messages

The NTRIP client reports status messages back through the same port from which it received
the [NTRIPCLIENT] command. This port number is saved in RAM and is initialized to an invalid
port number at power-on. Status messages are only displayed after the first [NTRIPCLIENT]
command after power-on. Refer to Table 70 for details.

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E