NavCom Sapphire Rev.J - Manual (Page 295)

Sapphire Technical Reference Manual Rev. J
295
2.50 NCTBD (Binary) and NCTBE (Binary)
SF-3050 Sapphire SF-3040
These output messages are scheduled via the [OUTPUT] command.

This command requires the BB option.
Examples: [OUTPUT]NCTBD, ONCHANGE, , 1
Outputs NCTBD when the data is available on port 1
[OUTPUT]NCTBD, ONTIME,1,2
Outputs NCTBD once per second on port 2
[OUTPUT]NCTBE, ONCHANGE, , 1
Outputs NCTBE when the data is available on port 1
[OUTPUT]NCTBE, ONTIME,1,2
Outputs NCTBE once per second on port 2