NavCom Sapphire Rev.J - Manual (Page 199)

Sapphire Technical Reference Manual Rev. J
199
1.145 REFSTNPOS (ASCII)
SF-3050 Sapphire SF-3040
This command is used in dGPS mode to set the known position of the base station.
Command: [REFSTNPOS] Lat-deg , Lat-min , Lat-sec , Lon-deg , Lon-min , Lon-sec , Height
Parameter Definition
Lat-deg Degree portion of latitude (integer) (-90 to 90, positive North)
Lat-min Minute portion of latitude (integer) (0 to 59, assumed to be in same direction as Lat-deg)
Lat-sec Second portion of latitude (float) (0 to <60, assumed to be in same direction as Lat-deg)
Lon-deg Degree portion of longitude, (integer) (-180 to 180, positive East)
Lon-min Minute portion of longitude (integer) (0 to 59, assumed to be in same direction as Lon-deg)
Lon-sec Second portion of longitude (float) (0 to <60, assumed to be in same direction as Lon-deg)
Height Mean sea level (MSL) height (float, meters) (-1000 to 18,000)

Minus sign for South or West must only precede the Lat-deg and Lon-deg fields.
Example: [REFSTNPOS] 33, 30, 22.649,-118, 20, 33.123, 65.89
Set the base station known position t
o: latitude North 33’30”22.649,
longitude West 118’20”33.123, height 65.89 meters.
1.146 Reserved
1.147 Reserved