NavCom Sapphire Rev.J - Manual (Page 287)

Sapphire Technical Reference Manual Rev. J
287
2.38 MSGVERSION (ASCII)
SF-3050 Sapphire SF-3040
This command is used to query the receiver on a recurring basis to request information on the
version of various installed software components. The response to this command includes the
version number, date and time stamp for the requested firmware component. The max rate to
schedule this message is once every 60 seconds. This command has the same format as
command [VERSION].

MSGVERSION is used with the OUTPUT command.
Example: [OUTPUT]MSGVERSION, ONTIME, 600, 1
Outputs version for firmware BOOT1, BOOT2, NAV, PIOBOOT, PIOAPP, and
BLUETOOTH (default) ONTIME every 600 seconds on port 1

Use [VERSION] to query the receiver on a one-time basis to request version
information.
Command: [MSGVERSION] {component}
Parameter Definition
component
Keyword, defined in Table 139, that specifies the firmware component for which version of
information is being requested
Default: Displays BOOT1, BOOT2, NAV, PIOBOOT, PIOAPP, and BLUETOOTH
Table 139: MSGVERSION Keywords for Software Components
Keyword Mnemonic Firmware Component
NAV Navigation (5200), CoreNav, LBAND DSP
BOOT1 Boot loader part 1 (5200)
BOOT2 Boot loader part 2 (5200)
PIOBOOT PIO cold bootloader
PIOAPP PIO application
BLUETOOTH Bluetooth