beautypg.com
Sapphire Technical Reference Manual Rev. J
150
1.100
USBMODE]DEVICE or [UPTIME
This command is used to retrieve the total time the receiver has been running since boot up OR since the last time the user rest the timer.
Command:
[UPTIME] RESET
Parameter
Definition
RESET
RESET will reset the start time to the current time, so that the user can use this as a counter from a specific point in time.
If the RESET parameter is not specified, the command will return the total time the receiver has been running or since the last time the time has been reset.
Examples:
[UPTIME]
[UPTIME]1 day, 20:56:19
[UPTIME]RESET
[OK] UPTIME
[UPTIME]00:00:02