NavCom Sapphire Rev.J - Manual (Page 54)

Sapphire Technical Reference Manual Rev. J
54
1.8 ANTENNAHEIGHT (ASCII)
SF-3050 Sapphire SF-3040
This command is used to enable or disable the antenna height adjustment.
Command:
[ANTENNAHEIGHT] {mode}, antenna phase center adjustment, slant
range of antenna body, radius of antenna body
Parameter Definition
Mode
Keyword (ON, OFF) to enable/disable the antenna height adjustment. If
this argument is empty, the receiver returns the current setting of the
enable flag.
Phase Center Adjustment
Antenna height adjustment within -128 - +127 millimeters. It will be
ignored if the mode is set to OFF. (Integer, millimeters)
Slant range of Antenna Body -32768 - +32767 (Integer, millimeters)
Radius of Antenna Body -32768 - +32767 (Integer, millimeters)
Default: OFF
Examples: [ANTENNAHEIGHT]ON,5.5,5000,3000
Request to enable antenna height adjustment
OK [ANTENNAHEIGHT]
Response from the receiver
[ANTENNAHEIGHT]
Request for antenna height settings
[ANTENNAHEIGHT]ON,5.5,5000,3000
Response shows antenna height adjustment setting parameters
[ANTENNAHEIGHT]OFF
Request to disable antenna height adjustment
OK [ANTENNAHEIGHT]
Response from the receiver
[ANTENNAHEIGHT]
Request for antenna height adjustment enable status
[ANTENNAHEIGHT]OFF
Response shows antenna height adjustment is disabled