Fscd (ascii) – NavCom Sapphire Rev.J User Manual

Page 111

Sapphire Technical Reference Manual Rev. J

111

1.59 FSCD (ASCII)

SF-3050

Sapphire

SF-3040

This command is used to change the current working directory. When a directory name is not
provided, this command returns the current working directory.

Command:

[FSCD] directory_name

1.60 Use this command with the SF-3050 2G internal memory device for data

logging. To download recorded data, refer to the [UPTIME

This command is used to retrieve the total time the receiver has been running since boot up OR
since the last time the user rest the timer.

RESET will reset the start time to the current time, so that the user can use this as a
counter from a specific point in time.

If the RESET parameter is not specified, the command will return the total time the receiver
has been running or since the last time the time has been reset.

Examples:

[UPTIME]

[UPTIME]1 day, 20:56:19

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E