NavCom Sapphire Rev.J - Manual (Page 286)

Sapphire Technical Reference Manual Rev. J
286
2.37 MSGPRODUCTINFO (ASCII)
SF-3050 Sapphire SF-3040
This command reports a receiver’s product type, digital serial number, and system revision
number. The max rate to schedule this message is once every 60 seconds.

The system revision number is incremented at every hardware change.

NavCom is continually looking for new OEM partners. The GNSS board that
comprises products in this family is shared between a multitude of NavCom and
OEM product lines. As new product lines or OEM partners are introduced, the
MSGPRODUCTINFO data will likely change to include those variations.
Command: [MSGPRODUCTINFO]
Example: [MSGPRODUCTINFO]
Request for product type, digital serial number, and system revision number
[MSGPRODUCTINFO]SF-3050M,12345,1
Response shows the product type, digital serial number, and system revision
number
These product type strings are supported:
SolarisNone
SolarisProduction
SF-3040
SF-3050
SF-3050A
SF-3050G
SF-3050S
SF-3050M
CNAV3050A
CNAV3050G
CNAV3050M
Sapphire
Dragon
VueStarII