Nct5c (binary) – NavCom Sapphire Rev.J User Manual

Page 292

Text mode
Original mode

Sapphire Technical Reference Manual Rev. J

292

2.43 NCT5C (Binary)

SF-3050

Sapphire

SF-3040

This output message is used to send the base coordinates from an RTK base site to the rover
receiver. Refer to Chapter 3, Legacy Starlight Proprietary RTK Correction Messages, for the
description of legacy Starlight message 0x5C.

This manual is related to the following products:

Sapphire Rev.B Sapphire Rev.A Sapphire Rev.D Sapphire Rev.K Sapphire Rev.L Sapphire Rev.F Sapphire Rev.E