NavCom Sapphire Rev.J - Manual (Page 224)

Sapphire Technical Reference Manual Rev. J
224
1.178 SFNETPRIORITY (ASCII)
SF-3050 Sapphire SF-3040
This command is used to set a StarFire
™ priority net.
Command: [SFNETPRIORITY] {default, net1, net2}
Parameter Definition
default
Keyword that allows a user to set the StarFire ™ satellite with the highest elevation
angle, regardless of Net1 or Net2, but subject to authorized nets (Net1-only, Net2-only,
or Net1 and Net2)
net1
Keyword that allows a user to set the StarFire ™ Net1 as the priority net, which allows
the receiver to select a Net1 StarFire ™ satellite with the highest elevation angle. If
there are no visible Net1 satellites, or if the receiver is licensed as Net2 only, the
receiver will select the Net2 StarFire
™ satellite with the highest elevation angle.
net2
Keyword that allows a user to set the StarFire ™ Net2 as the priority net, which allows
the receiver to select a Net2 StarFire ™ satellite with the highest elevation angle. If
there are no visible Net2 satellites, or if the receiver is licensed as Net1 only, the
receiver will select the Net1 StarFire
™ satellite with the highest elevation angle.

If no keyword is entered, the command is treated as a query and the system
returns the current StarFire
™ priority net setting.
Examples
[SFNETPRIORITY]
Returns the current StarFire
™ priority net settings
[SFNETPRIORITY]DEFAULT
Commands the receiver to select the StarFire
™ satellite with the highest elevation
angle, subject to authorized nets
[SFNETPRIORITY]NET1
Sets StarFire
™ Net1 as the priority net, which commands the receiver to select the
Net1 StarFire ™ satellite with the highest elevation angle
1.179 Reserved
1.180 Reserved