Good packet counts (percentage), Idle packet counts (percentage), Re-synchronization counts – NavCom Sapphire Rev.J User Manual
Page 372: Reserved, Starfire license status, External hub id
Sapphire Technical Reference Manual Rev. J
372
2.110.6
Good packet counts (percentage)
This field displays the percentage of good packets in received StarFire data. It is
updated every 20 seconds.
2.110.7
Idle packet counts (percentage)
This field displays the percentage of idle packets in received StarFire data. It is updated
every 20 seconds.
2.110.8
Re-synchronization counts
This field represents the StarFire parser packet framing re-synchronization count.
2.110.9
Reserved
2.110.10 StarFire license status
(Version 1)
B0; 1 = The StarFire License and the StarFire Software Option are licensed and
enabled. Both a valid license and software option are required to enable the StarFire
Subscription Service.
0 = The StarFire Subscription Service is not enabled.
(Version 3)
B0 = 1 indicates StarFire option is licensed and enabled, otherwise 0.
B1 = Reserved
B4-B2: Hub ID
– for StarFire GPS corrections
B7-B5: Hub ID
– for StarFire GNSS corrections
B7-B5 StarFire GNSS
B4-B2 StarFire GPS HUB ID
B1
Reserved
B0
– SF
license
2.110.11 External Hub ID
(Version 5)
This is an 8bit field that reports the Hub ID acquired by the receiver from a Starfire
correction message received via NTRIP, Ethernet, or Serial connection. The default
value for this External Hub ID, if not altered, is 255.
This field differs from the OTA Hub ID and is updated by the last received Hub ID from
an external SF Correction message.
2.111
Reserved