NavCom Sapphire Rev.J - Manual (Page 222)

Sapphire Technical Reference Manual Rev. J
222
1.171 SETUTCOFFSET (ASCII)
SF-3050 Sapphire SF-3040
This command is used to set the local time zone offset from UTC. This is used by the NMEA
ZDA message.
Command: [SETUTCOFFSET] {hours}, {minutes}
Parameter Definition
hours hour portion of the offset (integer) (-13 to 13)
minutes minute portion of the offset (integer) (0 to 59)
Default: offset hr = 0; offset min = 0

If the command is entered without any arguments the current offset is displayed. If
the offset has not been set, the command will respond ‘Not Set’.
Example: [SETUTCOFFSET] -8,30
Set the local time zone offset from UTC to -8 hours and 30 minutes.
1.172 Reserved
1.173 Reserved
1.174 Reserved