NavCom Sapphire Rev.J - Manual (Page 116)

Sapphire Technical Reference Manual Rev. J
116

USBMODE] command in this manual.
Examples: [FSDELETE] “my_directory”
Deletes “my_directory”
If the directory does not exist, the following message will be output:
[FSDELETE]UNKNOWN FILE OR DIRECTORY
[FSDELETE] “my_file.dat”
Deletes the
file “my_file.dat”
[FSDELETE] “/directory_1/directory_2/directory_3”
Deletes the root_directory\directory_1\directory_2\directory_3
[FSDELETE] “./directory_1/directory_2/my_file.dat”
[FSDELETE] “.\directory_1\directory_2\my_file.dat”
Deletes the file current_directory\directory_1\directory_2\my_file.dat

Once USB mode is changed to Mass Storage Device mode, the onboard file
system commands cannot access the SD flash. The following message is output:
[FSDELETE]"ACCESS DENIED: USB IS IN MASS STORAGE MODE".

When changing the USB from Mass Storage Device mode to other modes, please
allow approximately 1 minute for the SD flash to be reconfigured and the onboard
file system to be reinitialized before implementing the onboard file system
commands.