Gasboy CFN III Manager Manual V3.6 User Manual
Page 78
[P:]* PRINT PUMP;A
↵
P#
T#
Pr
Pc
Price
Totals
$Total
Q Previous
$ Previous
1
1
1
1
0.799
178.770
181.10
29.700
23.73
2
2
2
0.859
360.716
322.74
22.600
19.41
3
3
3
0.919
740.360
741.94
45.500
41.81
2
1
1
1
0.799
84.110
66.44
0.000
0.00
2
2
2
0.859
2.140
1.83
0.000
0.00
3
3
3
0.919
462.540
494.42
10.000
9.19
3
3
3
3
0.919
353.044
357.14
20.000
18.38
4
4
4
4
1.069
336.634
349.97
0.000
0.00
5
1
1
1
0.799
7019.954
6722.35
55.900
44.66
6
2
2
2
0.859
503.411
548.22
33.700
28.95
7
3
3
3
0.919
464.840
578.71
15.500
14.24
8
4
4
4
1.069
778.470
804.44
44.000
47.03
======== ========
11284.99 11169.30
[P:]*
Tank and Pump Commands
Pump Commands
Page 8-10 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
The last column, pump status, which has no heading, shows the current status of the hose.
The A option with PRINT PUMP displays the values of the pump totalizers, as of the end of
the previous shift. (These values are updated whenever the commands LOAD SHIFT, NEXT
SHIFT, RESET TOTALS, and NEXT DAY are run).
The first seven columns with the A option are identical to the PRINT PUMP display. The two
columns on the right display each pump’s quantity and dollar totals at the time the shift change
occurred; these two columns are not totaled.
Option
Description
Down
The pump is out of service. The commands PRINT DIAGNOSTICS 2 and PRINT DIAGNOSTICS 8
give more diagnostic information about pump control units and pumps, respectively.
Pumping
The pump is currently activated. The command PRINT TIP gives more information on transactions
in progress.
Reader
If this appears for any length of time, the pump is stuck. Type ENABLE PUMP;A followed by the
pump number.
Console
If this appears for any length of time the pump is stuck. Type ENABLE PUMP;A followed by the
pump number.
Disabled
You have run the DISABLE PUMP command, no price has been entered in the Site Controller, or
the pulser has developed a problem.
Ful Srv
The pump is in full-serve mode. It will pump any time the hose is taken off-hook. To get a pump out
of full-serve mode, type DEACTIVATE PUMP;A followed by the pump number.
—
The pump is idle.