Gasboy CFN III Manager Manual V3.6 - Manual (Page 77)

MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010 Page 8-9
Pump Commands Tank and Pump Commands
How to View Pump Information
The PRINT PUMP or P PU command displays information for each pump. If MPDs are used,
PRINT PUMP displays the information for each hose under each pump. Hose numbers are not
displayed, but the information under each pump is in order by hose number.
PRINT PUMP (P PU)
[P:]* PRINT PUMP
↵
P# T# Pr Pc Price Totals $Total Rate Limit Slow
1 1 1 1 0.799 178.770 181.10 100/$ $30 0.500
2 2 2 0.859 360.716 322.74 Pumping
3 3 3 0.919 740.360 741.94
2 1 1 1 0.799 84.110 66.44 100/$ $30 0.500 Down
2 2 2 0.859 2.140 1.83
3 3 3 0.919 462.540 494.42
3 3 3 3 0.919 353.044 357.14 100/$ $30 0.500
4 4 4 4 1.069 336.634 349.97 100/$ $30 0.500 Pumping
5 1 1 1 0.799 7019.954 6722.35 100/G $500 0.500
6 2 2 2 0.859 503.411 548.22 100/G $30 0.500 Pumping
7 3 3 3 0.919 464.840 578.71 100/G $30 0.500
8 4 4 4 1.069 778.470 804.44 100/G $30 0.500
========= =========
11284.99 11169.30
[P:]*
Command Description
P# The pump number is the number of the pump, dispenser, or MPD (in the above example,
pumps 1 and 2 are MPDs).
— The hose number is not displayed, but is used to determine the order in which hose
information for an MPD is displayed (pumps 1 and 2 have three hoses). For other pumps
and dispensers, the hose number is 1.
T# The tank number is the number of the fuel storage tank drawn upon by that hose.
Pr The product code is the number of the product assigned to the hose with LOAD FUEL. Use
PRINT PRODUCT to view the product names that correspond to the numbers.
Pc The price code controls what prices will be charged for each method of payment such as
cash or credit. It is the code entered with LOAD FUEL.
Price The price is the current fallback value assigned to the price code with LOAD PRICE (the
fallback price is defined in this chapter under Price codes).
Totals The quantity totalizer is the cumulative quantity pumped for the hose. These totalizers will
roll over periodically when all 9s are displayed.
$Totals The dollar totalizer is the cumulative dollar sales for the hose. Dollar totalizers will also roll
over periodically.
Rate The pulser rate is the number of pulses produced per unit of measure, such as gallons. It
applies only to fuel products, and is an accurate way of measuring flow. $ means that
dollars are being counted, L means that liters are being counted, and G means that gallons
are being counted.
Limit The fill limit is the amount automatically requested, unless overridden, when a customer
asks for a fill (the limit assigned to privately issued cards can be different than the hose fill
limit).
Slow The slow flow cutoff point determines how soon before reaching a limit or preset amount
the slow pump mode is activated. The purpose of slow flow cutoff is to prevent the pump
from coasting past the preset amount or limit. Slow flow cutoff point is always specified in
gallons or liters.