Gasboy CFN III Manager Manual V3.6 - Manual (Page 18)

Introduction Logging onto Windows XP as Administrator
Page 1-4 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
Administrator Level
Administrator is where users are added or deleted, your hardware settings changed, passwords
changed, and so on. You can also add software updates. The Administrator requires a separate
login, has a different password, and has additional features/options. There are more icons
displayed on the desktop.
Note: Administrator level accounts must not be shared between multiple users. Therefore,
each administrator level user must have an individual account. Accounts can be created
by logging to the Windows XPE as an administrator user. Access Control Panel > User
Account, to add a user.
The RUN command, used to install software from the Start button, is only available from the
Administrator level. This command is a Windows XP operating system command and is
different from the CFN3 RUN command.
Logging onto Windows XP as Administrator
When the computer boots, the default login is Gasboy. To make any changes to your CFN3
setup you must log in as Administrator. To log in as the Administrator, proceed as follows:
1 Select Start > Shutdown.
2 From the Shut Down Windows screen, select the list of options under the “What do you want
the computer to do?” prompt.
Figure 1-2: Shut Down Window
3 Select Log off gasboy.
Note: Before logging off, ensure that you shut down (exit to the OS) the integral Profit Point
system, if present.