Gasboy CFN III Manager Manual V3.6 - Manual (Page 234)

Communications Remote Authorizations
Page 22-2 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
• You may use the C option with the command LOAD PHONE to load both phone numbers.
The phone numbers are set up to dial out through a PBX system. The modem will dial 9
(pulse), wait 2 seconds, then dial the number using tone.
[P:]* LOAD PHONE;C M P9,,T543-9974,B,P9,,T543-3245
↵
Phone number?
↵
[P:]*
• A single comma separates the command arguments, and two commas enter a 2-second
pause.
How To Print Dial-out Phone Numbers
Use the command PRINT PHONE or P PH to print the dial-out phone numbers that have been
entered. The printout will show whether the phone numbers are for the following:
• the Main (or 1) number and the Backup (or 2) number
PRINT PHONE (P PH)
[P:]* PRINT PHONE
↵
Main Backup
CFN P9,T543-9974 P9,T543-3245
[P:]*
• the bank host (Bank)—the 3 and 4 numbers,
• the auxiliary phone number (Aux)—the 5 and 6 numbers
How to Initiate a Call
Dial-out sites call the remote number automatically when they require to get authorization for
a transaction. You can use the command CALL to manually initiate a call.
CALL
[P:]* CALL
↵
Dialing .... Connected.
[P:]*
If the remote modem is down, or if the site is not configured to dial out, the terminal will print
host unavailable when you try to execute CALL. If the connection is never established or is
broken off, the terminal will print Failed.