Gasboy CFN III Manager Manual V3.6 - Manual (Page 164)

Fuel Allocation and Miles-per-Gallon Miles per Gallon System
Page 15-8 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
How to Print MPG Report
Use the command PRINT VEHICLE or P V to print the MPG report. The MPG report lists the
vehicles numbers, and for each vehicle number, it gives:
Command Description
B Odom The vehicle’s beginning odometer reading for the MPG period.
E Odom The vehicle’s ending odometer reading for the MPG period.
Miles The number of miles driven this MPG period.
Gals The number of gallons used during this MPG period.
Cost The amount spent (at the current price) during this MPG period.
MPG The average miles per gallon for this period.
$/Mile The average dollars per mile for this period.
PRINT VEHICLE (P V)
[P:]* PRINT VEHICLE
↵
Vehicle B Odom E Odom Miles Gals Cost MPG $/Mile
10 7536.8 7732.1 195.3 7.81 7.61 25.0 0.038
11 9320.4 9530.7 210.3 9.31 9.04 22.6 0.042
12 8021.3 8313.4 292.1 10.11 9.93 28.9 0.033
13 8421.5 8725.6 304.1 11.21 10.94 27.1 0.035
14 New
[P:]*
If the status of the vehicle is NEW, HIGH, LOW, or BAD, the status is also printed on the
report. For example:
How to Remove a Vehicle Number
When you remove a vehicle number from the MPG system, the Site Controller no longer
tracks the fuel-usage information for that vehicle. Use the command REMOVE VEHICLE or
REM V to remove a vehicle from the MPG tracking.
REMOVE VEHICLE (REM V)
[P:]* REMOVE VEHICLE
↵
Vehicle number : 10
↵
[P:]*
Use the command LOAD VEHICLE with the I option to remove all vehicles from the MPG
system.