Gasboy CFN III Manager Manual V3.6 - Manual (Page 59)

LOAD HEADING;C (LO H;C)
[P:]* LOAD HEADING;C
↵
Line number? 1
↵
Heading line? {SMITTY’S STATION}
↵
Line number? 11
↵
Footing line? THANK YOU ~
↵
Line number? 12
↵
Footing line? THANK YOU
↵
Line number?
↵
[P:]*
MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010 Page 6-3
Receipt Heading and Footing Receipts, Messages, and Date
The C and N options may be followed by any combination of B or E. B causes the text to be
struck twice, giving a bold effect. E puts the print into expanded mode. The second footing
line is the same as the first, so it will overstrike the same characters, causing a bold print effect.
If you have other types of printers in addition to the Star printer, they will ignore the special
characters. That means the first heading line will print normally, and the first two footing lines
will be printed on different lines instead of one on top of the other.
How to Print Receipt Heading and Footing
Type: PRINT HEADING (or P H).
PRINT HEADING (P H)
[P:]* PRINT HEADING
↵
N. Heading
0 5 BLANK LINES AT END
1 SMITTY’S STATION
2 10 MAIN STREET
3 SMITH, WA 98000
11 THANK YOU
12 PLEASE COME AGAIN
[P:]*
The terminal will display the line number and the text for each heading and footing line. For
more information, refer to
“Printing an Invoice” on page 27-2 .
• Line numbers 1 through 9 are heading lines.
• Line numbers 11 through 19 are footing lines.
• Line numbers 20 - 29 are for Credit Card receipts.
• Line numbers 30 - 39 are the invoice header.
• Line numbers 40 - 49 are the invoice footer.
• Line 0 is the form feed length.
How to Change Heading and Footing Lines
To change one heading or footing line, just use the LOAD HEADING command to enter new
text for that line.
To erase all receipt heading and footing lines and reenter new ones, use the command LOAD
HEADING;IC. The I option erases all current heading and footing lines and the blank form
feed lines at the end. The C option allows you to enter new heading and footing lines.