Gasboy CFN III Manager Manual V3.6 - Manual (Page 211)

MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010 Page 19-13
How to Exit from Command Files Making Your Own Commands
As many commands as there are available entries in the cron table may be queued
simultaneously.
Since cron and the console use the same command processor, commands queued with
EXECUTE will not start until the console is logged off remote command mode.
Since EXECUTE runs commands in the background, make sure all your command files that
are run with EXECUTE do not contain any indefinite loops. Otherwise, you can lock up the
program space. If you must fill the program space, use the REMOVE CRON;AI command to
remove all running or pending executable or cron commands.
How to Exit from Command Files
The Site Controller command EXIT, if encountered in a command file, will cause the
command file to terminate. This will not log the user off the data terminal or console. To
terminate the command file and log off the user, use QUIT.