Gasboy CFN III Manager Manual V3.6 - Manual (Page 42)

Site Controller III Optional Commands
Page 3-14 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
Optional Commands
Several of the commands shown on the help list, such as DISABLE FPR and ENABLE FPR,
work only with the optional programs you may not have installed. If you try to run these
commands without having installed the program, an error message appears.
HELP Command
Type HELP to list all valid commands and options for the permission level you are signed on
at (the short form of the commands are shown in uppercase letters).
The following illustration shows a printout for a user who has access to all commands. The
number before each command is the number that runs that command from a console.
If you specify the first word of a command with the HELP command, only the commands that
start with that word will be printed. For example, HELP LOAD prints all the commands that
start with LOAD.
If you type HELP * and the second part of a command, you will see all the commands whose
second word starts with what you specified. For example, HELP * VEHICLE (note the blank
space before and after the *) prints all the commands whose second word is VEHICLE.