Gasboy CFN III Manager Manual V3.6 - Manual (Page 240)

Preventive Maintenance POS Terminals
Page 24-2 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
A special cleaning card is used to clean magnetic strip card reader units. Magnetic strip
cleaning cards are available from Gasboy (part number C08757). These cards are individually
packed in foil wrappers containing an alcohol-based cleaning solution. After removing the
card from the wrapper, pass it several times in the usual direction through the strip reader, then
discard it.
POS Terminals
Magnetic Card Reader
Follow the procedure discussed above under Island Card Reader for cleaning the magnetic
strip reader.
Keyboard
You require to clean the keyboard only if the key caps become noticeably grimy or if loose
debris has collected in the key wells.
To clean the key caps, use a soft, lint-free cloth. Spay a small amount of general purpose wall
cleaner (products such as 409
® or Fantastik ® ) on the cloth. Never spray anything directly on
the keyboard. Turn the keyswitch to OFF and remove the key. Wipe the key caps with a
circular motion until clean. Replace the key and you are ready to resume normal operation.
To clean debris from the key wells, use a vacuum cleaner with a drapery attachment. Use a
plastic attachment only, not a metal one, to avoid scratching the case. First make sure all clear
key covers are firmly seated by pressing down on each key. Then pass the vacuum attachment
over the keys without actually touching them. Any loose matter that has fallen into the
keyboard will be removed.